old olive – Artful Musings

Tag: old olive

05
Sep
2018

Fun-N-Crafty | Country Lane Suite

categories: Artful Pursuits, Fun-n-Crafty, Stampin' Up!

Hello my crafty peeps! I’m happy to be here again this month as part of the Fun & Crafty blog hop. You should have arrived here from Stacey’s A Work of Carte blog. If you didn’t, not to worry the complete list is below! Today the Stampin’ Up! Holiday catalog is live and there are oh so many goodies! To kick off the new catalog, a few of us participated in a holiday catalog card swap to get even more creative ideas to share with you!

For my card I decided to use the Country Lane suite, which includes the Country Home stamps, Country Lane DSP, Tin Tile Dynamic TIEF, Braided Linen Trim, Chicken Wire Elements, Galvanized Clips, Galvanized Metallic Paper, and two new combo packs of Stampin’ Blends.I really love the versatility of this stamp set and the embossing folder gives so much detail, especially with the galvanized metallic paper. In the coming months I plan to use more of my favorites from the new holiday catalog in blog posts so stay tuned!

I started with a Blackberry Bliss horizontal top-folding A2 card base and because it’s a dark color I decided to include a white insert for writing a message to that special someone, which meant more stamping inside! For the card front, I began by cutting a piece of Mint Macaron to 4″ x 5.25″ for a mat and a Whisper White to 3.75″ x 5″ for the stamped panel. Next, I cut 6″ x 6″ squares of the galvanized metallic paper and ran it through the Tin Tile TIEF. I cut these into 1.5″ x 5.25 strips.

Using Memento black ink, I stamped the cotton flower image 1.45″ above the bottom edge three times on the panel. I also stamped the sentiment “happy harvest blessings” on the top of the panel. To make the cotton pop and look extra white, I outlined each stamped image using the light Mint Macaron Stampin’ Blend. I also colored the other parts of the images using the combo packs of Blackberry Bliss, Cajun Craze, and Old Olive Stampin’ Blends.

All that remained, was assembling the cards. First, I adhered the interior panel as well as the front Mint Macaron mat, the Whisper White stamped layer, and finally the tin tile galvanized strip. I clipped one of the cute galvanized clips to the panel and adhered it to the card base using dimensionals. For the final touch, I made a bow out of the braided linen trim and using a rolled up mini glue dot, adhered it to the top of the galvanized clip.

There is a ton of inspiration throughout this hop and I encourage you to grab your Stampin’ Up holiday catalog and some post-it notes, and visit the other talented crafters listed below to see what they created and perhaps leave them some crafty love! Up next is the wonderful Merit over at MB Squared Designs. Until next time, remember, creativity and imperfection live together in all we do. “Grace is the face love wears when it meets imperfection.”

~xoxo

Stacey — A Work of Carte
Christine — Artful Musings (you are here)
Merit — MB Squared Designs
Nicole — Inky Fingers Stamping
Jennifer — NW Stamper
Tobe — The Craft Sea
Pamela — Stinky Tofu

Supplies Used:
Country Home Stamps (147678)
Tin Tile Dynamic TIEF (147906)
Galvanized Metallic Paper (147805)
Card Stock: Whisper White, Blackberry Bliss, & Mint Macaron
Ink: Blackberry Bliss & Memento
Blends: Blackberry Bliss, Cajun Craze, Old Olive, & Mint Macaron (light)
Accessories: Galvanized Clips (147806), Braided Linen Trim (147808), Snail, & Glue Dots

28
Sep
2017

Fun-n-Crafty | A Painted Harvest

categories: Fun-n-Crafty, Stampin' Up!

Hello my crafty peeps! I’m happy to be here again this month as part of the Fun & Crafty blog hop. This month’s theme is Fall or Halloween! It seems like only yesterday we were in the middle of summer. This past Friday was the official first day of Fall, but here in Seattle, we don’t seem to have gotten the memo (it’s been sunny and warm for the past hew weeks). I went shopping at Trader Joe’s bright and early Saturday morning and was amazed. It was like the entire place had been hosed down with pumpkin spice … overnight. Pumpkin spice cake, cookies, pasta, fudge, caramel corn, cereal … you name it and TJ’s probably has it … even the dogs were included with pumpkin spice dog biscuits! I love fall, and pumpkin spice, so a few things (the caramel corn was delicious) may have made their way into my basket!

This month I decided to focus on one of my favorite suites in the new Holiday catalog, The Painted Harvest. It includes a wonderful layering stamp set with these dreamy floral and leaf images, some “thankful” sentiments, and best of all a coordinating leaf punch. There is also a beautiful pack of 12 x 12 DSP and some wooden elements. This is a very versatile suite of products with color combinations for fall, the holidays, and spring.

I decided to combine this suite with a cool technique, eclipse. I love this technique with the Stampin’ Up! large letters framelits. I began with an A2 Whisper White card base, a 5.25″ x 4″ Chocolate Chip mat, and a 5″ x 3.75″ thick Whisper White panel for stamping. This set has that “artistic” look (the base stamps don’t stamp solid) and sometimes I think, “Oh, no, it’s going to look terrible!”, but it never does! HINT: I use the Stampin’ Pierce Mat to make sure I get good coverage from photopolymer stamps.

Beginning with the base flower, I stamped three on the panel in Crushed Curry. Next, using the detail layering image, I stamped over the large flower in Cajun Craze ink. I also stamped a flower onto a post-it note and fussy cut it to use as a mask for stamping the leaves, which I stamped in Pear Pizzazz for the base and Old Olive for the detail. I also stamped the flower middle using Chocolate Chip ink. Lastly, I stamped the sentiment, “I am thankful for you” in Chocolate Chip.

Now, it’s time to create the eclipse. Using the Y – O – U letters, I centered them on the panel and secured them in place using post-it note tape. I ran this through my BigShot and then popped them out. HINT: Make sure to keep any letter centers (like in the O) to adhere to the matte panel. To make sure you get it centered, first put the letter in its place, put adhesive on the back of the center piece, and put it down. Then you can lift out the letter. Using the foam adhesive strips, pop up each letter inside its space on the card.

There is a ton of inspiration throughout this hop. Since you started here, I encourage you to grab a favorite beverage, perhaps a pumpkin spice latte, and visit the other talented team members listed below to leave them some blog love! Next up is the amazing Merit. Until next time, remember, creativity and imperfection live together in all we do. “Grace is the face love wears when it meets imperfection.”

~xoxo

Tobe — The Craft Sea
Christine — Artful Musings (you are here)
Merit — MB Squared
Jennifer — NW Stamper
Susan — Stampin by the SF Bay

Supplies Used:
Stamps & Dies: Painted Harvest (144783) & Large Letters Framelits (141712)
Card Stock: Whisper White (100730) & Chocolate Chip (102128)
Ink: Crushed Curry, Cajun Craze, Chocolate Chip, Pear Pizzazz, & Old Olive
Foam Adhesive Strips (141825)

14
Sep
2017

Innovation Station | Washi, Washi, Washi

categories: Innovation Station, Stampin' Up!, Washi

Hello, crafty peeps and welcome to another Innovation Station post, a monthly feature focusing innovative tips and tricks. Each month I share an innovation that I find myself going to again and again.

This month’s innovation is washi tape. I seriously need a 12-step program for my washi tape addiction! Thin, thick, glittery, transparent, opaque … I LOVE washi! There are some wonderful tapes on the market today and some of my favorites are from SU! I especially like the face that SU coordinates their washi in complimentary color families. Today I’m going to share two of my favorite washi techniques: the washi die cut and the washi background. Both are super simple, yet add so much to your card making!

Washi is super thin which when layered over card stock makes it perfect for die cutting and background techniques. When I sat about choosing suites for this month’s cards, I knew what I wanted to use for each technique, but beyond the washi element, I wasn’t sure what the cards were going to look like. I almost scrapped both cards because I wasn’t happy with how either was coming together. Does this ever happen to you? Fortunately, inspiration struck and I am pretty happy with the way both cards turned out.

For the washi background card, I used the Delightful Daisy suite. I love this suite! From the stamps, to the DSP, to that great daisy punch … it’s one of my favorite suites in the annual catalog. I knew I wanted to “knock out” the daisy image (sort of the reverse of what might be expected) and have the washi showing through. In some of the photos you will see a version with two daisies that ended up getting scrapped (it was way too busy) in favor of the final card. I began with a Pool Party A2 card base. Using a corner rounder I rounded the upper left and lower right corners of both the card base and the Whisper White panel (4″ x 5.25″). I cut out a daisy in the upper middle of the panel using the Daisy Punch and added two leaves using the companion two-step stamps.

I cut a 2.75″ x 2.75″ piece of Whisper White and using the new Basics Pack 3 washi tape, added rows until the entire piece was covered. Using my bone folder, I burnished the washi down and using adhered it behind the daisy opening with Fast Fuse. I put one of the new clear Faceted Gems n the center of the daisy. Next, I cut a 4″ x 1.75″ piece of DSP from the Delightful Daisy DSP and a 3.73″ x 1.5″ piece of Whisper White, on which I stamped “Thank You” in Night of Navy ink. I rounded the corners of the white piece and adhered it to the DSP, which then was adhered to the main white panel. Inside I stamped “…for your kindness.” in Night of Navy ink. HINT: I could have applied the washi directly to the card base, but since washi is semi-transparent I didn’t want it to show the card base color so I opted for a Whisper White panel instead.

For the die cut washi card, I wanted to use the new “Happy Birthday” die, the coordinating stamp set, and especially the Foil Frenzy specialty DSP. I am in love with this kraft card stock foil paper! It is so beautiful and screams happy birthday! The process for die cutting washi is very simple. Begin with a piece of card stock large enough to accommodate your die and apply washi. Place this piece washi side up on your cutting matte and put the die face down over it. Add the other plate and run it through your Big Shot. Voila, you have die cut washi!

For this card I began with an A2 card base in Berry Burst. Using the largest solid layering oval, I cut a window out of the front of the card. In this opening I adhered a piece of polka dot foil frenzy card stock. I also cut the happy birthday out of a piece of Basic Black card stock. I glued the washi die cut to this black piece slightly offset to create a shadow. Once that was dry, I popped it up using the new mini dimensionals, cutting them in half to make sure they didn’t show. Using VersaMark ink and white embossing powder I added the sentiment “it’s your day” to the front of the card below the oval. For the finishing touch, I added a few flat backed gems by Little Things from Lucy’s Cards.

Thanks for hanging out with me, and learning (or relearning) a fun innovation! Join me next month for another of my go to innovations, watercolor backgrounds. Until next time, remember, creativity and imperfection live together in all we do. “Grace is the face love wears when it meets imperfection.”

~xoxo

Supplies Used:
Washi: Basics Pack 1 (144221) & Pack 3 (144223)
Happy Birthday Gorgeous Bundle (145301)
Foil Frenzy Specialty DSP (144125)
Daisy Delight Bundle (145361) & Delightful Daisy DSP (144137)
Card Stock: Pool Party, Berry Burst, Whisper White & Basic Black
Ink: Night of Navy, Lemon Lime Twist, Old Olive & VersaMark
Extras: Clear Faceted Gems (144142) & Flat Backed Gems

10
Aug
2017

Innovation Station | Don’t Lose Your Marbles

categories: Innovation Station, Stampin' Up!

Hello my crafty peeps and welcome to another Innovation Station post, a monthly feature focusing innovative tips and tricks. Each month I share an innovation that I find myself going to again and again.

This month’s innovation is the rolling marbles technique. This technique reminds me of a Jackson Pollock splatter painting and it’s so simple and fun. Honestly, I’d sort of forgotten about this technique (I used to use it all the time) until a friend demoed it at an event recently. I came home after and began searching for my marbles (literally, not figuratively). Once I’d found them I began playing and couldn’t really seem to stop.

One of the things my friend, Jennifer Blomquist, demoed was using a container (a half wood mount stamp case from Stampin’ Up!) to create this background. I always did this technique in a box and it was messy and sometimes uneven. Needless to say, I thought the stamp case idea was brilliant. The half wood mount case will work for smaller pieces (max size in this case is 3 1/4″ x 4 3/4″), but often I want to do a larger piece so I decided to try using the full wood mount stamp case from Stampin’ Up!, and it was perfect for the larger pieces (max size in this case is 4 3/4″ x 7″). HINT: marble to reinker ratios … half size case between 5 & 7 marbles and 2 — 3 drops of reinker, in the full size case between 9 & 11 marbles and 4 — 6 drops of reinker.

For my first card I wanted to use the new host set, Tranquil Tulips. I love this set! It is both a layering set as well as a mixed media style set, meaning the images aren’t designed to stamp solid, they have a dreamy quality to them. I began with a Mint Macaron A2 card base and cut a matte panel out of Powder Pink (4″ x 5 1/4″) that I mounted to the card base.

Next, I cut the marble panel out of Whisper White (3 7/8″ x 5 1/8″) and marbled it using a full wide stamp case, 9 marbles, and about 6 drops of Mint Macaron reinker. I put the marbles in the case and then the reinker drops in the middle. I closed the case and moved the marbles around until they were covered in reinker and there weren’t any big drops of reinker remaining. Next, I opened the case and secured the Whisper White panel to the lid using some low tac painters tape. Close the case and flip it over so the panel is now on the bottom with the marbles on top. Begin moving the marbles around the case until you are satisfied with the coverage. HINT: You can add additional reinker if needed by flipping the case back over (so the panel is on top and the marbles on the bottom). Once that was done I ran the it through my BigShot with the border from the Card Front Builder dies.

I also the tulip panel is 3 3/4″ x 4 1/4″ and the Powder Pink matte is 3 7/8″ x 4 3/8″. I stamped the tulips, stems, and leaves using Powder Pink, Lemon Lime Twist, and Smokey Gray. HINT: I stamped the stems first, followed by the tulips and finally the leaves. You could also stamp the tulips first, but for optimal placement on the panel, I preferred stamping the stems first. Once dry, I covered the tulips in clear Wink of Stella for a bit of shimmer and shine. I custom dyed some seam binding ribbon using Mint Macaron and Powder Pink reinkers. As I began layering all the pieces together I felt something was missing and decided it needed a sentiment, but I was stuck on where and what. As I looked over some of my sentiment sets, I came across the new bundle, Tabs for Everything, and knew just what I needed! Using the coordinating punch, I punched a tab out of Lemon Lime Twist card stock. Next, I stamped “hello you” on a piece of Whisper White card stock and punched it out using a hole punch. I stamped the scalloped frame from the stamp set onto the tab and mounted the circle using a mini glue dot. I tucked this between the tulip panel and the Powder Pink matte. I think it pulls the card together nicely!

For my second card I wanted to use another marbled background I’d created using Pacific Point so I turned to the Birthday Delivery bundle since Pacific Point is one of the coordinating colors for this suite. I love giving special birthday cards to friends and I knew this would be the perfect card for a friend who loves foxes. I was very excited when I realized that in addition to matching the stamps, the dies cut elements from the coordinating DSP. I also like that there are stamps curved to fit inside the flag banner that the fox holds. There are a bunch of amazing embellishments in this suite, including pop-up honeycomb balloons. I knew the card needed one of these inside and that is how the poodle (I call her Lola) came to be hanging out inside!

I began with an Old Olive A2 card base and I stamped the present randomly in Old Olive in for a tone-on-tone effect. I die cut the fox and banner from the DSP and also cut the following strips: striped DSP (1 1/4″ x 4 1/4″), Pacific Point marbled card stock (1″ x 4 1/4″), and Pacific Point card stock (3/4″ x 4 1/4″) onto which I stamped the sentiment, “Let’s Celebrate Your Day,” and layered all three pieces together with snail. Using the dies, I cut Lola and two balloons from the DSP and stamped the balloon strings on the left inside panel, positioning them so they looked like she had them in her mouth. The honeycomb balloon has adhesive, making placement a breeze! HINT: For perfect honeycomb placement, place it last and follow these steps: expose one side of the adhesive and place it flush with your center score line then you can expose the left side and simply close the card for the proper placement every time! I finished it off with the “SURPRISE” sentiment and some thin strips of DSP.

Thanks for hanging out with me, and learning (or relearning) a fun innovation! Join me next month for another of my go to innovations, washi techniques. Until next time, remember, creativity and imperfection live together in all we do. “Grace is the face love wears when it meets imperfection.”

~xoxo

Supplies Used:
Full Wide Stamp Case (127551) & Half Wide Stamp Case (127552)
Reinker: Mint Macaron, Pacific Point, & Powder Pink
Card Stock: Mint Macaron, Powder Pink, Lemon Lime Twist, Old Olive, Pacific Point, & Whisper White
Birthday Memories DSP (144118), Balloon Honeycomb (144124), & Glass Marbles
Stamps & Dies: Tranquil Tulips (143767) & Card Front Builder (144674)
Bundles: Tabs for Everything (145364) & Birthday Delivery Bundle (145294)

10
Nov
2016

Fun & Crafty | November Blog Hop

categories: Christmas Inspiration, Fun-n-Crafty, Stampin' Up!

Hello, friends! I’m on the blog today with a new project using the Tin of Tags kit currently for sale in the Stampin’ Up! Holiday Catalog. This is a new blog hop that our group of demonstrators are planning to have on a regular basis.

Stampin’ Up! kits provide a great value and allow for loads of creativity. Almost everything needed to complete 30 gift tags is included in the kit. The only thing you need is the coordinating stamp set, adhesive, and ink pads. The kit contains full color instructions and the tags are cute and super simple for various crafting skill levels. I like this kit so much that I am making it with my church group.

There are 10 different tag styles and you have supplies enough to make three of each style. Here are a few pictures of the tags as I made them along with a final picture showing all of the tags. This is a very quick project, taking between 1 and 2 hours, depending on skill level.

There is a ton of Christmas inspiration throughout this hop. If you started here, please visit the other talented team members listed below and leave them some blog love! Until next time, remember, creativity and imperfection live together in all we do. “Grace is the face love wears when it meets imperfection.”

~xoxo
Beanie

Tobe B – The Craft Sea
Pamela Wu – Stinky Tofu
Kathy Thisted – Stampablog
Jennifer Blomquist – Northwest Stamper
Stacey Lane – A Work of Carte
Susan Schultz – Stampin By The Bay
Christine Szekeres – Artful Musings (you are here)
Nicole Flournoy – Inky Fingers Stamping
Danielle Elvin – Going to Collage

Supplies Used:
Tin of Tags
Tin of Tags Stamp Set
Inks: Crushed Curry, Island Indigo, Old Olive, & Real Red
Acrylic Blocks: A, D, & G
Adhesive: Mini Glue Dots, Stampin’ Dimensionals & Fine Tip Glue